The Mooer Micro Looper. Record, playback, stop, overdub and delete, all these functions can be controlled by one single footswitch. You have easy and direct access to experience and create. The Micro Looper has up to 30 minutes of recording time and unlimited overdubbing times. You can focus on your music and need not to worry about other troubles. And of course, all in the small micro series size.
MICRO LOOPER Operation
How to record Loops/overdub
To start recording, press the footswitch once, the LED will be lit in RED, indicating Micro Looper is in Record mode.
To switch to playback, press the footswitch again to quit Record mode. The LED will turn BLUE and start playback.
You can record another loop based on the original loop (Overdub). Press the footswitch while the original loop is playing, the LED will turn RED, indicating Micro Looper is in Record mode again.
Press the footswitch once again to quit Record mode. The LED will turn BLUE. Micro Looper will playback both the original loop and the newly added overdub recording.
How to Undo recordings
To delete your last recording, press and hold the footswitch for 2 seconds or longer.
The LED blinks rapidly twice confirming the recording is deleted.
How to Redo recordings
If you deleted your last recording but you want it back, you can restore it by pressing and holding the footswitch for 2 seconds or longer.
The LED blinks rapidly twice confirming recording is restored.
How to stop/start/delete the loops
To stop the loop playback, press the footswitch twice quickly. The LED will start blinking in BLUE.
To start the loop again, press the footswitch once.
To delete everything you have recorded, press the footswitch twice quickly and hold down on the second press.The LED will turn off, indicating all the loop date have been deleted.
Controls volume of recorded loop
saves recording on power off
external power supply 9V (center minus plug), 140mA